From aab9bb42224fbb92c11eabb477282a8f0efe1c17 Mon Sep 17 00:00:00 2001 From: Sam Varshavchik Date: Sat, 28 Feb 2015 11:59:45 -0500 Subject: Remove clean and smudge filters from the git repo that are used to stamp sysconftool-processed configuration file. Rename all sysconftool-processed configuration files to *.git, and use a build rule to create a stamped sysconftool file. Fix a couple of compilation warnings. --- imap/imapd.dist.in.git | 468 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 468 insertions(+) create mode 100644 imap/imapd.dist.in.git (limited to 'imap/imapd.dist.in.git') diff --git a/imap/imapd.dist.in.git b/imap/imapd.dist.in.git new file mode 100644 index 0000000..08ecd69 --- /dev/null +++ b/imap/imapd.dist.in.git @@ -0,0 +1,468 @@ +##VERSION: $Id:$ +# +# imapd created from imapd.dist by sysconftool +# +# Do not alter lines that begin with ##, they are used when upgrading +# this configuration. +# +# Copyright 1998 - 2008 Double Precision, Inc. See COPYING for +# distribution information. +# +# This configuration file sets various options for the Courier-IMAP server +# when used with the couriertcpd server. +# A lot of the stuff here is documented in the manual page for couriertcpd. +# +# NOTE - do not use \ to split long variable contents on multiple lines. +# This will break the default imapd.rc script, which parses this file. +# +##NAME: ADDRESS:0 +# +# Address to listen on, can be set to a single IP address. +# +# ADDRESS=127.0.0.1 + +ADDRESS=0 + +##NAME: PORT:1 +# +# Port numbers that connections are accepted on. The default is 143, +# the standard IMAP port. +# +# Multiple port numbers can be separated by commas. When multiple port +# numbers are used it is possible to select a specific IP address for a +# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" +# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 +# The previous ADDRESS setting is a default for ports that do not have +# a specified IP address. + +PORT=143 + +##NAME: AUTHSERVICE:0 +# +# It's possible to authenticate using a different 'service' parameter +# depending on the connection's port. This only works with authentication +# modules that use the 'service' parameter, such as PAM. Example: +# +# AUTHSERVICE143=imap +# AUTHSERVICE993=imaps + +##NAME: MAXDAEMONS:0 +# +# Maximum number of IMAP servers started +# + +MAXDAEMONS=40 + +##NAME: MAXPERIP:0 +# +# Maximum number of connections to accept from the same IP address + +MAXPERIP=4 + +##NAME: PIDFILE:0 +# +# File where couriertcpd will save its process ID +# + +PIDFILE=@piddir@/imapd.pid + +##NAME: TCPDOPTS:0 +# +# Miscellaneous couriertcpd options that shouldn't be changed. +# + +TCPDOPTS="-nodnslookup -noidentlookup" + +##NAME: ACCESSFILE:0 +# +# IMAP access file. + +IMAPACCESSFILE=@sysconfdir@/imapaccess + +##NAME: LOGGEROPTS:0 +# +# courierlogger(1) options. +# + +LOGGEROPTS="-name=imapd" + +##NAME: DEFDOMAIN:0 +# +# Optional default domain. If the username does not contain the +# first character of DEFDOMAIN, then it is appended to the username. +# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended +# only if the username does not contain any character from DOMAINSEP. +# You can set different default domains based on the the interface IP +# address using the -access and -accesslocal options of couriertcpd(1). + +#DEFDOMAIN="@example.com" + +##NAME: IMAP_CAPABILITY:1 +# +# IMAP_CAPABILITY specifies what most of the response should be to the +# CAPABILITY command. +# +# If you have properly configured Courier to use CRAM-MD5, CRAM-SHA1, or +# CRAM-SHA256 authentication (see INSTALL), set IMAP_CAPABILITY as follows: +# +# IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE" +# + +IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE" + +##NAME: KEYWORDS_CAPABILITY:0 +# +# IMAP_KEYWORDS=1 enables custom IMAP keywords. Set this option to 0 to +# disable custom keywords. +# +# IMAP_KEYWORDS=2 also enables custom IMAP keywords, but uses a slower +# algorithm. Use this setting if keyword-related problems occur when +# multiple IMAP clients are updating keywords on the same message. + +IMAP_KEYWORDS=1 + +##NAME: ACL_CAPABILITY:0 +# +# IMAP_ACL=1 enables IMAP ACL extension. Set this option to 0 to +# disable ACL capabilities announce. + +IMAP_ACL=1 + +##NAME: SMAP1_CAPABILITY:0 +# +# EXPERIMENTAL +# +# To enable the experimental "Simple Mail Access Protocol" extensions, +# uncomment the following setting. +# +# SMAP_CAPABILITY=SMAP1 + +##NAME: IMAP_CAPABILITY_ORIG:2 +# +# For use by webadmin + +IMAP_CAPABILITY_ORIG="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE" + +##NAME: IMAP_PROXY:0 +# +# Enable proxying. See README.proxy + +IMAP_PROXY=0 + +##NAME: PROXY_HOSTNAME:0 +# +# Override value from gethostname() when checking if a proxy connection is +# required. +# +# PROXY_HOSTNAME= + +##NAME: IMAP_PROXY_FOREIGN:0 +# +# Proxying to non-Courier servers. Re-sends the CAPABILITY command after +# logging in to the remote server. May not work with all IMAP clients. + +IMAP_PROXY_FOREIGN=0 + +##NAME: IMAP_IDLE_TIMEOUT:0 +# +# This setting controls how often +# the server polls for changes to the folder, in IDLE mode (in seconds). + +IMAP_IDLE_TIMEOUT=60 + +##NAME: IMAP_MAILBOX_SANITY_CHECK:0 +# +# Sanity check -- make sure home directory and maildir's ownership matches +# the IMAP server's effective uid and gid + +IMAP_MAILBOX_SANITY_CHECK=1 + +##NAME: IMAP_CAPABILITY_TLS:0 +# +# The following setting will advertise SASL PLAIN authentication after +# STARTTLS is established. If you want to allow SASL PLAIN authentication +# with or without TLS then just comment this out, and add AUTH=PLAIN to +# IMAP_CAPABILITY + +IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN" + +##NAME: IMAP_TLS_ORIG:0 +# +# For use by webadmin + +IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN" + +##NAME: IMAP_DISABLETHREADSORT:0 +# +# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands - +# server side sorting and threading. +# +# Those capabilities will still be advertised, but the server will reject +# them. Set this option if you want to disable all the extra load from +# server-side threading and sorting. Not advertising those capabilities +# will simply result in the clients reading the entire folder, and sorting +# it on the client side. That will still put some load on the server. +# advertising these capabilities, but rejecting the commands, will stop this +# silliness. +# + +IMAP_DISABLETHREADSORT=0 + +##NAME: IMAP_CHECK_ALL_FOLDERS:0 +# +# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new +# mail in every folder. Not all IMAP clients use the IMAP's new mail +# indicator, but some do. Normally new mail is checked only in INBOX, +# because it is a comparatively time consuming operation, and it would be +# a complete waste of time unless mail filters are used to deliver +# mail directly to folders. +# +# When IMAP clients are used which support new mail indication, and when +# mail filters are used to sort incoming mail into folders, setting +# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new +# mail in folders. Note that this will result in slightly more load on the +# server. +# + +IMAP_CHECK_ALL_FOLDERS=0 + +##NAME: IMAP_OBSOLETE_CLIENT:0 +# +# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean +# what \\HasNoChildren really means. + +IMAP_OBSOLETE_CLIENT=0 + +##NAME: IMAP_UMASK:0 +# +# IMAP_UMASK sets the umask of the server process. The value of IMAP_UMASK is +# simply passed to the "umask" command. The default value is 022. +# +# This feature is mostly useful for shared folders, where the file permissions +# of the messages may be important. + +IMAP_UMASK=022 + +##NAME: IMAP_ULIMITD:0 +# +# IMAP_ULIMITD sets the maximum size of the data segment of the server +# process. The value of IMAP_ULIMITD is simply passed to the "ulimit -d" +# command (or ulimit -v). The argument to ulimi sets the upper limit on the +# size of the data segment of the server process, in kilobytes. The default +# value of 65536 sets a very generous limit of 64 megabytes, which should +# be more than plenty for anyone. +# +# This feature is used as an additional safety check that should stop +# any potential denial-of-service attacks that exploit any kind of +# a memory leak to exhaust all the available memory on the server. +# It is theoretically possible that obscenely huge folders will also +# result in the server running out of memory when doing server-side +# sorting (by my calculations you have to have at least 100,000 messages +# in a single folder, for that to happen). + +IMAP_ULIMITD=65536 + +##NAME: IMAP_USELOCKS:0 +# +# Setting IMAP_USELOCKS to 1 will use dot-locking to support concurrent +# multiple access to the same folder. This incurs slight additional +# overhead. Concurrent multiple access will still work without this setting, +# however occasionally a minor race condition may result in an IMAP client +# downloading the same message twice, or a keyword update will fail. +# +# IMAP_USELOCKS=1 is strongly recommended when shared folders are used. + +IMAP_USELOCKS=1 + +##NAME: IMAP_SHAREDINDEXFILE:0 +# +# The index of all accessible folders. Do not change this setting unless +# you know what you're doing. See README.sharedfolders for additional +# information. + +IMAP_SHAREDINDEXFILE=@sysconfdir@/shared/index + +##NAME: IMAP_ENHANCEDIDLE:0 +# +# If Courier was compiled with the File Alteration Monitor, setting +# IMAP_ENHANCEDIDLE to 1 enables enhanced IDLE mode, where multiple +# clients may open the same folder concurrently, and receive updates to +# folder contents in realtime. See the imapd(8) man page for additional +# information. +# +# IMPORTANT: IMAP_USELOCKS *MUST* also be set to 1, and IDLE must be included +# in the IMAP_CAPABILITY list. +# + +IMAP_ENHANCEDIDLE=0 + +##NAME: IMAP_TRASHFOLDERNAME:0 +# +# The name of the magic trash Folder. For MSOE compatibility, +# you can set IMAP_TRASHFOLDERNAME="Deleted Items". +# +# IMPORTANT: If you change this, you must also change IMAP_EMPTYTRASH + +IMAP_TRASHFOLDERNAME=Trash + +##NAME: IMAP_EMPTYTRASH:0 +# +# The following setting is optional, and causes messages from the given +# folder to be automatically deleted after the given number of days. +# IMAP_EMPTYTRASH is a comma-separated list of folder:days. The default +# setting, below, purges 7 day old messages from the Trash folder. +# Another useful setting would be: +# +# IMAP_EMPTYTRASH=Trash:7,Sent:30 +# +# This would also delete messages from the Sent folder (presumably copies +# of sent mail) after 30 days. This is a global setting that is applied to +# every mail account, and is probably useful in a controlled, corporate +# environment. +# +# Important: the purging is controlled by CTIME, not MTIME (the file time +# as shown by ls). It is perfectly ordinary to see stuff in Trash that's +# a year old. That's the file modification time, MTIME, that's displayed. +# This is generally when the message was originally delivered to this +# mailbox. Purging is controlled by a different timestamp, CTIME, which is +# changed when the file is moved to the Trash folder (and at other times too). +# +# You might want to disable this setting in certain situations - it results +# in a stat() of every file in each folder, at login and logout. +# + +IMAP_EMPTYTRASH=Trash:7 + +##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0 +# +# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash. This +# effectively allows an undo of message deletion by fishing the deleted +# mail from trash. Trash can be manually expunged as usually, and mail +# will get automatically expunged from Trash according to IMAP_EMPTYTRASH. +# +# NOTE: shared folders are still expunged as usual. Shared folders are +# not affected. +# + +IMAP_MOVE_EXPUNGE_TO_TRASH=0 + +##NAME: IMAP_LOG_DELETIONS:0 +# +# +# Set IMAP_LOG_DELETIONS to log all message deletions to syslog. +# +# IMAP_LOG_DELETIONS=1 + +##NAME: IMAPDEBUGFILE:0 +# +# IMAPDEBUGFILE="imaplog.dat" +# +# Generate diagnostic logging of IMAP commands. +# +# Set this globally, restart the server. Touch this file in an account's +# maildir directory, and Courier-IMAP will append all IMAP commands received +# for new sessions for this account. NOTE: existing IMAP sessions are not +# affected, only new IMAP logins. + + +##NAME: OUTBOX:0 +# +# The next set of options deal with the "Outbox" enhancement. +# Uncomment the following setting to create a special folder, named +# INBOX.Outbox +# +# OUTBOX=.Outbox + +##NAME: SENDMAIL:0 +# +# If OUTBOX is defined, mail can be sent via the IMAP connection by copying +# a message to the INBOX.Outbox folder. For all practical matters, +# INBOX.Outbox looks and behaves just like any other IMAP folder. If this +# folder doesn't exist it must be created by the IMAP mail client, just +# like any other IMAP folder. The kicker: any message copied or moved to +# this folder is will be E-mailed by the Courier-IMAP server, by running +# the SENDMAIL program. Therefore, messages copied or moved to this +# folder must be well-formed RFC-2822 messages, with the recipient list +# specified in the To:, Cc:, and Bcc: headers. Courier-IMAP relies on +# SENDMAIL to read the recipient list from these headers (and delete the Bcc: +# header) by running the command "$SENDMAIL -oi -t -f $SENDER", with the +# message piped on standard input. $SENDER will be the return address +# of the message, which is set by the authentication module. +# +# DO NOT MODIFY SENDMAIL, below, unless you know what you're doing. +# + +SENDMAIL=@SENDMAIL@ + +##NAME: HEADERFROM:0 +# +# For administrative and oversight purposes, the return address, $SENDER +# will also be saved in the X-IMAP-Sender mail header. This header gets +# added to the sent E-mail (but it doesn't get saved in the copy of the +# message that's saved in the folder) +# +# WARNING - By enabling OUTBOX above, *every* IMAP mail client will receive +# the magic OUTBOX treatment. Therefore advance LARTing is in order for +# _all_ of your lusers, until every one of them is aware of this. Otherwise if +# OUTBOX is left at its default setting - a folder name that might be used +# accidentally - some people may be in for a rude surprise. You can redefine +# the name of the magic folder by changing OUTBOX, above. You should do that +# and pick a less-obvious name. Perhaps brand it with your organizational +# name ( OUTBOX=.WidgetsAndSonsOutbox ) + +HEADERFROM=X-IMAP-Sender + +##NAME: ID_FIELDS:0 +# +# Have the server be polite, and identify its version to the client. The client +# must be logged in before the server will identify itself. Additionally, +# the client will mutually supply its own software version, and the server will +# log it. +# +# Although the server's banner message identifies itself, in free-form manner, +# this the ID IMAP extension, for clients to log. +# +# IMAP_ID_FIELDS is the sum of the following values: +# +# 1 - identify the version of the IMAP server +# 2 - identify the operating system (if available) +# 4 - identify the operating system release (if available) +# +# A value of 0 identifies the server software only. +# +# Uncomment this setting to enable the IMAP ID extension. One reason you might +# want to enable it is to log the clients' software version. Enabling this +# setting will mutually log the client's software, in the system logs. +# +# IMAP_ID_FIELDS=0 + +##NAME: OUTBOX_MULTIPLE_SEND:0 +# +# Remove the following comment to allow a COPY of more than one message to +# the Outbox, at a time. +# +# OUTBOX_MULTIPLE_SEND=1 + +##NAME: IMAPDSTART:0 +# +# IMAPDSTART is not used directly. Rather, this is a convenient flag to +# be read by your system startup script in /etc/rc.d, like this: +# +# . @sysconfdir@/imapd +# +# case x$IMAPDSTART in +# x[yY]*) +# @libexecdir@/imapd.rc start +# ;; +# esac +# +# The default setting is going to be NO, so you'll have to manually flip +# it to yes. + +IMAPDSTART=NO + +##NAME: MAILDIRPATH:0 +# +# MAILDIRPATH - directory name of the maildir directory. +# +MAILDIRPATH=Maildir -- cgit v1.2.3