| Age | Commit message (Collapse) | Author |
|---|
|
initially undefined
Previously if the collection model was set to undefined on the first digest,
the repeater would get confused and not use the correct tracking function
for associating model with dom elements in the repeater.
Closes #4145
Closes #3964
|
|
Ref: https://github.com/angular/angular.dart/blob/master/test/directives/ng_non_bindable_spec.dart
|
|
Ref: https://github.com/angular/angular.js/pull/4045
I have this sinking feeling that support this use case sort of
encourages binding to function that blindly trust some html. For now,
I'm fixing the issue while I think about the use cases some more.
In the case of a function that performs any non-trivial work before
wrapping the value (e.g. the showdown filter in issue #3980, or the
binding to a simply wrapper function in issue #3932 if it did anything
meaty), this fix makes it "work" - but performance is going to suck -
you should bind to some other thing on scope that watches the actual
source and adjusts itself when that changes (e.g. the showdown filter.)
For the case of the wrapper in #3932, if one isn't performing
sanitization or some such thing - then you the developer has insight
into why that value is safe in that particular context - and it should
be available simply by name and not as a result of a function taking any
arbitrary input to make auditing of security a little saner.
Closes #3932, #3980
|
|
BREAKING CHANGE: ngInclude's priority is now set to 1000
It's quite rare for anyone to depend on explicity directive priority,
but if a custom directive that needs to run before ngInclude exists,
it should have its priority checked and adjusted if needed.
Closes #3793
|
|
|
|
|
|
and move animations
Closes #3727
Closes #3603
|
|
|
|
|
|
Closes #3566
|
|
transclusion system
|
|
Closes #3459
|
|
|
|
Errors I've documented so far:
- `$injector:cdep`
- `$injector:itkn`
- `$injector:modulerr`
- `$injector:nomod`
- `$injector:pget`
- `$injector:unpr`
- `ng:areq`
- `ng:cpi`
- `ng:cpws`
- `ngModel:noass`
Closes #3430
|
|
<form name="ctrl.form"> form controller will accessible
as $scope.ctrl.form instead of $scope['ctrl.form']
BREAKING CHANGE:
If you have form names that will evaluate as an expression:
<form name="ctrl.form">
And if you are accessing the form from your controller:
Before:
function($scope) {
$scope['ctrl.form'] // form controller instance
}
After:
function($scope) {
$scope.ctrl.form // form controller instance
}
This makes it possible to access a form from a controller
using the new "controller as" syntax. Supporting the previous
behavior offers no benefit.
|
|
The input field email regex does't not match long domain extensions. This commit extends the email regexp to take a 6 character TLD.
Example 6-character TLDs include .museum and .travel - (e.g. allabout.travel).
|
|
|
|
Change the implementation of isArrayLike to use one heavily based on the
implementation in jQuery in order to correctly detect array-like
objects, that way functionality like ngRepeat works as expected.
|
|
empty string
If ngClass fires off an add- or removeClass whilst the opposite animation is going on then
the animation will be skipped. The default behavior of ngClass was executing remoteClass
with an empty string while addClass had just fired. This commit fixes that bug.
|
|
BREAKING CHANGE: previously ngInclude only updated its content, after this change
ngInclude will recreate itself every time a new content is included. This ensures
that a single rootElement for all the included contents always exists, which makes
definition of css styles for animations much easier.
|
|
|
|
- ngAnimate directive is gone and was replaced with class based animations/transitions
- support for triggering animations on css class additions and removals
- done callback was added to all animation apis
- $animation and $animator where merged into a single $animate service with api:
- $animate.enter(element, parent, after, done);
- $animate.leave(element, done);
- $animate.move(element, parent, after, done);
- $animate.addClass(element, className, done);
- $animate.removeClass(element, className, done);
BREAKING CHANGE: too many things changed, we'll write up a separate doc with migration instructions
|
|
Changes:
- remove ng-bind-html-unsafe
- ng-bind-html is now in core
- ng-bind-html is secure
- supports SCE - so you can bind to an arbitrary trusted string
- automatic sanitization if $sanitize is available
BREAKING CHANGE:
ng-html-bind-unsafe has been removed and replaced by ng-html-bind
(which has been removed from ngSanitize.) ng-bind-html provides
ng-html-bind-unsafe like behavior (innerHTML's the result without
sanitization) when bound to the result of $sce.trustAsHtml(string).
When bound to a plain string, the string is sanitized via $sanitize
before being innerHTML'd. If $sanitize isn't available, it's logs an
exception.
|
|
$sce is a service that provides Strict Contextual Escaping services to AngularJS.
Strict Contextual Escaping
--------------------------
Strict Contextual Escaping (SCE) is a mode in which AngularJS requires
bindings in certain contexts to result in a value that is marked as safe
to use for that context One example of such a context is binding
arbitrary html controlled by the user via ng-bind-html-unsafe. We
refer to these contexts as privileged or SCE contexts.
As of version 1.2, Angular ships with SCE enabled by default.
Note: When enabled (the default), IE8 in quirks mode is not supported.
In this mode, IE8 allows one to execute arbitrary javascript by the use
of the expression() syntax. Refer
http://blogs.msdn.com/b/ie/archive/2008/10/16/ending-expressions.aspx
to learn more about them. You can ensure your document is in standards
mode and not quirks mode by adding <!doctype html> to the top of your
HTML document.
SCE assists in writing code in way that (a) is secure by default and (b)
makes auditing for security vulnerabilities such as XSS, clickjacking,
etc. a lot easier.
Here's an example of a binding in a privileged context:
<input ng-model="userHtml">
<div ng-bind-html-unsafe="{{userHtml}}">
Notice that ng-bind-html-unsafe is bound to {{userHtml}} controlled by
the user. With SCE disabled, this application allows the user to render
arbitrary HTML into the DIV. In a more realistic example, one may be
rendering user comments, blog articles, etc. via bindings. (HTML is
just one example of a context where rendering user controlled input
creates security vulnerabilities.)
For the case of HTML, you might use a library, either on the client side, or on the server side,
to sanitize unsafe HTML before binding to the value and rendering it in the document.
How would you ensure that every place that used these types of bindings was bound to a value that
was sanitized by your library (or returned as safe for rendering by your server?) How can you
ensure that you didn't accidentally delete the line that sanitized the value, or renamed some
properties/fields and forgot to update the binding to the sanitized value?
To be secure by default, you want to ensure that any such bindings are disallowed unless you can
determine that something explicitly says it's safe to use a value for binding in that
context. You can then audit your code (a simple grep would do) to ensure that this is only done
for those values that you can easily tell are safe - because they were received from your server,
sanitized by your library, etc. You can organize your codebase to help with this - perhaps
allowing only the files in a specific directory to do this. Ensuring that the internal API
exposed by that code doesn't markup arbitrary values as safe then becomes a more manageable task.
In the case of AngularJS' SCE service, one uses $sce.trustAs (and
shorthand methods such as $sce.trustAsHtml, etc.) to obtain values that
will be accepted by SCE / privileged contexts.
In privileged contexts, directives and code will bind to the result of
$sce.getTrusted(context, value) rather than to the value directly.
Directives use $sce.parseAs rather than $parse to watch attribute
bindings, which performs the $sce.getTrusted behind the scenes on
non-constant literals.
As an example, ngBindHtmlUnsafe uses $sce.parseAsHtml(binding
expression). Here's the actual code (slightly simplified):
var ngBindHtmlUnsafeDirective = ['$sce', function($sce) {
return function(scope, element, attr) {
scope.$watch($sce.parseAsHtml(attr.ngBindHtmlUnsafe), function(value) {
element.html(value || '');
});
};
}];
Impact on loading templates
---------------------------
This applies both to the ng-include directive as well as templateUrl's
specified by directives.
By default, Angular only loads templates from the same domain and
protocol as the application document. This is done by calling
$sce.getTrustedResourceUrl on the template URL. To load templates from
other domains and/or protocols, you may either either whitelist them or
wrap it into a trusted value.
*Please note*:
The browser's Same Origin Policy and Cross-Origin Resource Sharing
(CORS) policy apply in addition to this and may further restrict whether
the template is successfully loaded. This means that without the right
CORS policy, loading templates from a different domain won't work on all
browsers. Also, loading templates from file:// URL does not work on
some browsers.
This feels like too much overhead for the developer?
----------------------------------------------------
It's important to remember that SCE only applies to interpolation expressions.
If your expressions are constant literals, they're automatically trusted
and you don't need to call $sce.trustAs on them.
e.g. <div ng-html-bind-unsafe="'<b>implicitly trusted</b>'"></div> just works.
Additionally, a[href] and img[src] automatically sanitize their URLs and
do not pass them through $sce.getTrusted. SCE doesn't play a role here.
The included $sceDelegate comes with sane defaults to allow you to load
templates in ng-include from your application's domain without having to
even know about SCE. It blocks loading templates from other domains or
loading templates over http from an https served document. You can
change these by setting your own custom whitelists and blacklists for
matching such URLs.
This significantly reduces the overhead. It is far easier to pay the
small overhead and have an application that's secure and can be audited
to verify that with much more ease than bolting security onto an
application later.
|
|
changing the type of select box from single to multiple or the other way around
at runtime is currently not supported and the two-way binding does odd stuff
when such situation happens.
we might eventually support this, but for now we are just going to not allow
binding to select[multiple] to prevent people from relying on something that
doesn't work.
BREAKING CHANGE: binding to select[multiple] directly or via ngMultiple (ng-multiple)
directive is not supported. This feature never worked with two-way data-binding,
so it's not expected that anybody actually depends on it.
Closes #3230
|
|
|
|
Closes #2997
|
|
Modifies default trackByIdFn to factor both key and value into hashKey
for non-array primitive (i.e. index not provided) values
Closes #2787
Closes #2806
|
|
|
|
Added directives for focus and blur events.
Closes #1277
|
|
not attached to the DOM
|
|
Add an alternative way to define a mapping for ng:pluralize using
attributes instead of the `when` attribute
Closes #2454
|
|
|
|
|
|
this test fails and we don't have intentions on making it pass since
we never made a commitment to implement this feature.
|
|
Previously if a template contained a directive that had a template
(sync or async) and the directive template was to replace the original
element and the directive template contained another directive on the
root element of this template and this new directive was an element
transclude directive then an infinite recursion would follow because
the compiler kept on re-adding and reapplying the original directive
to the replaced node.
This change fixes that.
Closes #2155
|
|
|
|
This reverts commit 0c6fb665a4e2e1e7ceb11372153963658d4b53b1.
The change invalidated the test because the point of the the test
was to test that an element directive works. Changing it to attribute
directive was wrong.
|
|
|
|
|
|
Closes# 2155
|
|
|
|
BREAKING CHANGE: Concatenating expressions makes it hard to reason about
whether some combination of concatenated values are unsafe to use
and could easily lead to XSS. By requiring that a single expression
be used for *[src/ng-src] such as iframe[src], object[src], etc.
(but not img[src/ng-src] since that value is sanitized), we ensure that the value
that's used is assigned or constructed by some JS code somewhere
that is more testable or make it obvious that you bound the value to
some user controlled value. This helps reduce the load when
auditing for XSS issues.
To migrate your code, follow the example below:
Before:
JS:
scope.baseUrl = 'page';
scope.a = 1;
scope.b = 2;
HTML:
<!-- Are a and b properly escaped here? Is baseUrl
controlled by user? -->
<iframe src="{{baseUrl}}?a={{a}&b={{b}}">
After:
JS:
var baseUrl = "page";
scope.getIframeSrc = function() {
// There are obviously better ways to do this. The
// key point is that one will think about this and do
// it the right way.
var qs = ["a", "b"].map(function(value, name) {
return encodeURIComponent(name) + "=" +
encodeURIComponent(value);
}).join("&");
// baseUrl isn't on scope so it isn't bound to a user
// controlled value.
return baseUrl + "?" + qs;
}
HTML: <iframe src="{{getIframeSrc()}}">
|
|
jQuery switched to a completely new event binding implementation as of
1.7.0, centering around on/off methods instead of previous bind/unbind.
This patch makes jqLite match this implementation while still supporting
previous bind/unbind methods.
|
|
|
|
|
|
$route, $routeParams and ngView have been pulled from core angular.js
to angular-route.js/ngRoute module.
This is was done to in order keep the core focused on most commonly
used functionality and allow community routers to be freely used
instead of $route service.
There is no need to panic, angular-route will keep on being supported
by the angular team.
Note: I'm intentionally not fixing tutorial links. Tutorial will need
bigger changes and those should be done when we update tutorial to
1.2.
BREAKING CHANGE: applications that use $route will now need to load
angular-route.js file and define dependency on ngRoute module.
Before:
```
...
<script src="angular.js"></script>
...
var myApp = angular.module('myApp', ['someOtherModule']);
...
```
After:
```
...
<script src="angular.js"></script>
<script src="angular-route.js"></script>
...
var myApp = angular.module('myApp', ['ngRoute', 'someOtherModule']);
...
```
Closes #2804
|
|
- add toThrowNg matcher
|
|
In line with ngSrc and ngHref, this new directive ensures that the
`srcset` HTML5 attribute does not include a pre-interpolated string.
Without it the browser will fetch from the URL with the literal text
`{{hash}}` until AngularJS replaces the expression inside `{{hash}}`.
Closes #2601
|
|
Extend ng-options with a new clause, "track by [trackByExpression]", which can be used when
working with objects. The `trackByExpression` should uniquely identify select options objects.
This solves the problem of previously having to match ng-options objects by identity.
You can now write: `ng-options="obj as obj.name for obj in objects track by obj.id"`
The "track by" expression will be used when checking for equality of objects.
Examples:
<select
ng-model="user.favMovieStub"
ng-options="movie as movie.name for movie in movies track by movie.id">
</select>
scope: {
user: { name: 'Test user', favMovieStub: { id: 1, name: 'Starwars' } }
movies: [{ id: 1, name: 'Starwars', rating: 5, ... }, { id: 13, ... }]
}
The select input will match user favMovieStub to the first movie in the movies array, and show
"Star Wars" as the selected item.
|
